...
GO to WMS.
Go to the Video Capture Configuration screen present in the Configuration Section.
Enter the NAS IP Address, Username, and Password. You can assign a Base folder name.
Save the configurations. A success message would show once the configurations are saved successfully.
The connection setup can be tested by clicking the button Test Connection Setup. A test video will be captured and saved in the NAS storage by the system and a test successful pop-up message will be shown.
Enabling Return Video Capturing Configuration in WMS
...
Below are the steps for Video Capturing during returns.
Search and Download the Video
Below are the steps for searching and downloading the captured video for returns.
Go to WMS-> Search Return Orders screen
Error Handling
If any error occurs during video capture, such as recording stops unintentionally, user will be prompted
As soon as any bin with QC fail item gets scanned, UI will save video till that point in indexedDB and if due to any issue recording interrupted, UI will send that captured video to NAS on screen reload
If any error occurs during sending the video to Backend, mark the status of that video in the indexedDB as failed and start the retry mechanism for that video
If user stays idle for around 10mins, recording will pause and a prompt will appear to confirm resuming the video capturing
If any video is uploading to NAS, an alert will be present on the screen informing user to not navigate away from that screen
In case user press reload mistakenly during video capturing, a confirmation prompt will appear
...